Description
The transplanting task describes the details of moving a crop from one location to another. Specifically, it describes the details of how it should be planted in it’s new home - collectively the “planting method”. The valid transplanting methods are:
Row
Bed
Individual
Container
Creation restrictions
Step | Restrictions |
|---|---|
2. Task date | None |
3. Task location(s) | User bypasses this screen. |
4. Involves crops? | Crop enabled locations with at least 1 active crop management plan (on the date shown in #2) must display. Users can only select one crop management plan from the active crop management plans displayed. |
5. Task assignment | None |
Creation attributes
As opposed to most other tasks, the specific creation flow for transplanting is either 3 or 4 screens:
Choose the location to transplant the crop (based on LF-1567)
Choose the planting method (based on LF-1340 & LF-1585)
The planting method specific inputs (one of LF-1344, LF-1345, LF-1346)
(Depending on #3) additional guidance (based on LF-1473 or LF-1474)
Completion attributes
The following attributes are new when marking a task as completed.
Attribute | Data type | Required? | Example data | Notes |
|---|---|---|---|---|
Did you have to make any changes to this task? | Enum: {“Yes”, “No”} | Yes; defaulted to no | All other fields are read-only unless “Yes” is selected. “Continue” becomes enabled after “Yes” or “No” is selected. |
All attributes related to the transplanting method creation should be displayed. The assignee should not be able to modify the method itself, but can modify the attributes within the method such as “Planting depth” or “Seeding rate”. For row and bed methods, the “Additional” guidance sections should also be shown on the same page. Depending on the method, the attributes that should be modifiable are outlined in the stories below:
Method | Stories |
|---|---|
Row | |
Bed | |
Individual | |
Container |
The assignee should not be able to modify the method itself, but can modify the attributes within the method such as “Planting depth” or “Seeding rate”. For row and bed methods, the “Additional” guidance sections should also be shown on the same page.