...
For our Spring 2021 release, the following lines will be supported:
Line type | Attributes | Other notes | Available Views |
---|---|---|---|
Fence |
| Length should be pre-populated by the maps API, but modifiable by the user. Fences that are pressure treated need to be declared for organic certifications. Only shown for organic certification. Options: {““, “Yes”, “No”} |
|
Creek |
| Length should be pre-populated by the maps API, but modifiable by the user. Used for irrigation: {““, “Yes”, “No”} Includes riparian buffer: {““, “Yes”, “No”} |
|
Buffer zone |
| Total area and perimeter should be pre-populated by the maps API, but modifiable by the user. Width is required. Standard is 8 meters for separation of organic and non-organic areas - though there are many reasons it can be less. Must be modifiable. |
|
|
| Length should be pre-populated by the maps API, but modifiable by the user. Type: {“Earthen” (default), “Gravel”, “Paved”} |
|
|
| Length should be pre-populated by the maps API, but modifiable by the user. Type: {“Earthen” (default), “Gravel”, “Paved”} |
|
For our Spring 2021 release, the following points will be supported:
Point type | Attributes | Other notes | Available Views |
---|---|---|---|
Water valve |
| Source: {“Surface water” (default), “Groundwater”, “Rainwater”} Flow rate unit is based on the users measurement preference. For metric: l/min (default), l/hour For imperial: g/min (default), g/hour |
|
Gate |
|
|
Transitioning from legacy fields to areas, lines, and points
...