Description
The planting task describes the details of putting a crop into the ground. It describes whether the plant is being put in the ground as a “seed” or as a “seedling or planting stock”. It also describes the details of how it should be planted - collectively the “planting method”. The valid planting methods are:
...
The following attributes are new when marking a seeding task as completed.
Attribute | Data type | Required? | Example data | Notes |
|---|---|---|---|---|
Actual seed required | Integer (w/ unit) | No | 4500 | 0 - 9999. Ideally allows the user to choose either mass or volume Unit displays. Must be pre-populated with the value entered in “Estimated seed required” during crop management plan creation. The actual value must not overwrite the estimated. Both should be saved to the database. |
Did you have to make any changes to this task? | Enum: {“Yes”, “No”} | Yes; defaulted to no | All other fields are read-only unless “Yes” is selected. “Continue” becomes enabled after “Yes” or “No” is selected. |
...
For row and bed methods, the “Additional” guidance sections should also be shown on the same page.
Migration guidance
Ignore this section for now
“Seeding” logs with the following type values should be migrated as shown.
Previous value | New value | Notes |
|---|---|---|
Date | Date | |
Locations | Location | For each location, a separate completed seeding task should be created. |
Method: “Bed” | All legacy seeding logs are assumed to be “Bed”. | |
Status: “Completed” | ||
Seeding depth | Seeding depth | Must translate from cm to user’s designated unit system |
Seed spacing | Plant spacing | Must translate from cm to user’s designated unit system |
Space width | Space between beds | Must translate from cm to user’s designated unit system |
Rate | N/A | |
Notes | Completion notes |